RGB LED Strip Lights (5m)

Five metres of colour-changing LED strip for a bedroom, desk setup, gaming corner or under a kitchen cabinet. It peels, sticks and plugs in — the whole install takes a few minutes.

Key specifications

• Length: 5 m, cuttable at marked intervals (roughly every 10 cm)
• LEDs: approx. 150 SMD 5050 RGB LEDs (30 per metre)
• Power: 12V DC via the supplied adapter; approx. 24W for the full 5 m run
• Control: 44-key infrared remote plus smartphone app control over Bluetooth
• Colours and modes: 16 million colours, adjustable brightness, plus fade, flash, strobe and music-sync modes
• Music sync: built-in microphone reacts to sound in the room
• Adhesive: 3M-style self-adhesive backing on the reverse
• Rating: indoor use only — not weatherproof, and not for bathrooms or outdoor runs

What's in the box

• 1 x 5 m RGB LED strip
• 1 x control box and 12V power adapter
• 1 x infrared remote (battery included)
• Mounting clips
• User guide

Installation tips

Wipe the surface clean and let it dry before sticking the strip down — adhesive will not hold on dusty or greasy surfaces. On textured paint or wallpaper, use the mounting clips instead, as the adhesive tends to peel and can take paint with it. If you cut the strip, cut only on the marked copper pads; the offcut will not light without a connector.

Care

Dust with a dry cloth only. Do not use liquid cleaners on the strip, and unplug before cleaning. Do not cover a lit strip with fabric or run it coiled on its reel, as trapped heat shortens LED life.